Velux roof window supply, installation and flashing across Heavitree. We install on Welsh slate, concrete tile and clay tile with the correct Velux flashing kit for each roof type. Victorian slate roofs — EDL low-pitch or EDW conservation flashings required depending on roof pitch and planning position. Free survey. Call 01392 759 295.
Velux window performance depends as much on the correct flashing specification as on the window itself. A standard EDW flashing kit suits most concrete and clay tile roofs in Heavitree. For Welsh slate, low-pitch roofs and heritage properties in Heavitree’s conservation areas, specialist flashings are required. We specify the correct flashing type at the survey stage — not after the window has been ordered.
Most domestic Velux installations in Heavitree are permitted development. The exceptions are properties in the conservation area, listed buildings, and installations that would exceed the permitted development limits for roof alterations. We confirm the planning position for every Heavitree survey before the window is ordered. Victorian slate roofs — EDL low-pitch or EDW conservation flashings required depending on roof pitch and planning position.
A standard Velux installation in Heavitree follows a clear sequence: survey confirms size, model and flashing type; window and flashings ordered; installation day — tiles removed, counter-batten and tiling batten adjusted, Velux EDL or EDW flashing fitted, window seated, tiles reinstated, internal reveal finished. The roof is weather-tight by the end of the same day. We carry a range of standard Velux sizes on all vehicles so most Heavitree surveys result in same-week installation.
Supply, fit and flash. Free survey. No call-out fee.
📞 Call 01392 759 295“Velux installed on our Victorian slate in Heavitree. Conservation flashing specified correctly. Planning position confirmed before ordering. Excellent result.”
“Two Velux windows on our concrete tile 1970s semi. Standard EDW flashing, correctly installed, fully weathertight the same day.”
“They checked nail condition before drilling through the tile. Two loose tiles found and replaced at the same time. Thorough approach.”
Supply and fit from £600–£900 per window including flashing. Free survey. Call 01392 759 295.
Most installations are permitted development. Conservation area and listed properties require prior notification or consent. We advise at survey.
A single window: half a day. Two or three windows: full day. Same-day weathertight.
Yes — we use the correct heritage or EDL flashing for Welsh slate roofs.
Full GGL (centre-pivot), GGU, GPU top-hung range. All standard sizes. We advise on the correct model and size at survey.
Yes — we check tile stability before drilling and replace loose tiles in the same visit.
10-year workmanship guarantee. Call 01392 759 295.
No call-out fee. No obligation. Local Devon roofers who turn up when they say they will.
01392 759 295